H矩形鋼/角鋼拋丸清除垃圾機

◆物料構成 Product structure

該機主要是由整理室、室內吊頂傳輸帶輥道與出入庫傳輸帶輥道、拋丸器、彈丸再水循環系統的 ( 含完善機、破乳器、縱行槽式氣流輸送器和供丸管材 ) 、吹掃培訓機構、煙氣凈化、電力設備設定等功能鍵組件成分。

This machine is mainly composed of clean room, indoor rollor conveyeer and in and out of rollor conveyeer, shot device, projectile circulation system (including hoist, separator, vertical and horizontal conveyor for spiral pipe) , purging institutions, dust removal, electrical control function components.

◆成品遠離 Product principle

為反復放卷的高工作反復操作清潔機，在清潔步驟中由機電保持的可調頻變頻調速的傳輸輥道將鋼設備構造件或鋼、鋼板規格送進清潔機室自身拋射區時，其全身各面面臨原于八臺不一樣坐標定位方面的拋丸器的強效密布彈丸的打擊網絡謠言與滾動摩擦，使其上的氧化的銹層及臟物快速發展松動，鋼外壁就得到 具備肯定凹凸不平度的亮澤外壁。落到鋼里邊的彈丸與銹塵經再利用轉鼓傳輸到彈丸重復模式，在清潔房間外雙方輥道運輸類件。清潔步驟中，撒落下去來的丸塵混合法物經室體漏斗、縱橫向轉鼓傳輸機薈萃于優化機下面，再優化到服務器上面的脫離器里，脫離后的清透彈丸落到脫離器料倉中，供拋丸重復的使用。拋丸清潔中呈現塵煙，由排風管送向抑塵操作模式，過濾操作后的凈氣排卸到細硬粒物環境中；顆料狀塵煙，由排風管送向抑塵操作模式，過濾操作后的凈氣排卸到細硬粒物環境中，顆料狀塵煙逮捕捉回收利用。

Continuous high function of feeding a continuous work cleaning machine, in the process of cleaning up from the electrical control can be variable frequency speed rollor conveyeer steel structure or steel, and will send into steel cleaning up machine room area, its trajectory in the whole face from each by eight  different coordinates the location of the powerful dense is shot of the projectile attack and friction, make its oxidation rusty layer and dirt quickly fall off, steel surface roughness has certain the bright and clean for surface. Fall into steel above with rust dust the projectile recycling helical conveyer to projectile circulation system, the clear channel outdoor both sides in unloading workpieces. In the process of cleaning up,  breaking down the Chambers blasting dust mixture, and vertical and horizontal funnel to screw conveyor are collected to hoist the lower, and then promoted to the upper part of the machine, after the separation in the separator pure projectile into separator, is shot in the hopper for recycling. Is shot from the dust, cleaning up by convulsions tube send to dust removal system, the purification processing of the net after gas emissions into the atmosphere; Granular dust by convulsions tube, send to dust removal system, the purification process after the net gas emissions into the atmosphere, the granular dust was caught and collected.

H鋼材/不銹鋼鋼板拋丸除去機

◆ 商品作用 Product features

鋼條拋丸深度清理機有的是種深度清理 H 鋼、不銹建筑鋼材料、網架、鋼板規格的多特點不銹建筑鋼材料拋丸預工作設備。拋丸器布設結構類型為多坡度，選取了效率高拋丸器，拋射出來高速路稠密的彈丸束，打壓在默認情況下鋁件的多個部件實施立體化的、全坐向的深度清理，使鋁件各外層上的生繡層、焊渣、氧化物皮以及它臟污很快脫落情況，取得具備著有一定干燥度的滑潤外層，增強了漆層與不銹建筑鋼材料外層的懸挑腳手架力，并增強鋁件的抗困倦和抗腐蝕性性能，解決了鋁件不確定性產品品質，拉長其采用保修期。

Steel shot machine is a clear H steel, steel, rack, steel, the multi-function steel is shot pretreatment equipment. Peen-forming decorate a form for the multiple perspectives, choose the advanced efficient peen-forming is a dense, aerosol propellant high speed of the projectile, blow the original state in parts of stereo, full range of cleaning, to make the work on the surface of the corrosion layer, welding slag and oxide skin and other contaminants quickly fall off, get has certain roughness of surface is bright and clean, improve the paint film with steel surface adhesion, and improve the resistance of fatigue and corrosion resistance, and improve the quality of the inner and prolong the service life.

◆ 一般新技術要求表 Main technical parameters