Q32系輪胎式拋丸清洗機

◆物料優勢特點 Product features

本輪式噴砂機適當多新品種，大中批量化生產的軸類的單單從表面防銹處理或拋丸淬煉，進行清理軸類須要是不是怕相碰的單重在150kg之下的鑄件及熱加工件，終端服務器既可單機手游選用，又可配線選用. 包括精密鑄造物理區域。

手動：將鑄件植入硅膠履帶滾軸中，實行操作考生按下面公式“正常運作”旋鈕，拋丸室門手動停用，拋丸整理已經開始，履帶前進正常運作，鑄件一直地實行翻滾，強力拋丸器將拋丸高拋噴到已經在翻滾的鑄件的表面上，鑄件可充分均地贏得整理。鋼丸利用履帶入的溜孔流入了旋轉卸料帶機，再將鋼丸卸料帶到斗式升降機，經斗式升降機升降到提取器，被提取后貯存待會兒用。拋丸終結后，拋丸室門手動進入，履帶改變方向，將鑄件卸出。

速騰自動檔：這手機是根據公路轉動的葉片將彈丸拋向履帶內重復滑動的軸類上，所以達到了處理軸類的主要目的。它應符合多列業中的中小型鑄件、鍛件、冷沖模件、傘齒、彈黃等件的清砂、防銹、去脫色皮和漆層增強。超聲波焊接機是綜合中國大陸外高技術，的設計激發的新產品開發機器，就是種處理率好、結構設計緊促、背景噪聲小、成套配電柜性好的處理機器。

This machine is suitable for various  large and medium-sized batch production of workpiece surface derusting or peen-forming strengthening, clean up the work-piece must be not afraid of the collision of the single is is 150 kg of the casting and heat treatment, the machine can not only a single use, and wiring use. Belong to casting machinery.

Automatic: the workpiece in rubber crawler roller, the operating personnel press "run" button,  shot room door close behind, pneumatic blast cleaning began to run forward, tracked, workpiece constantly, efficient and powerful shot peen-forming high-speed mixer trajectory to is back on the surface of workpiece, workpiece can completely evenly clear. Steel shot through the crawler sneak into the hole, then screw conveyor will be sent to the steel shot a hoist, a type of the hoist to ascend to the separator, separated by storage to use. Is shot ended, is shot room door open automatically, tracked reversal, discharged the workpiece.

Manual operation: This machine uses high-speed rotary projectile impeller will throw to turn over the workpiece in continuous caterpillar, so as to achieve the purpose of cleaning up the workpiece. It is used in the industries of small-sized castings, forgings, stamping, gear, springs, and a rust-removing, derusting, to oxide skin and surface strengthening. This machine is comprehensive technology, the development of domestic and foreign design new products, it is a kind of cleaning efficiency high, compact structure, the noise is small, systematic good cleaning equipment.

◆好產品共同點 Product features

1.超聲波焊接機選取了懸臂抽濾式拋丸器，擁有利用使用時間長和型式簡簡單單等特殊性。

2.選用BE型拆分器，擁有很好的拆分成效和分娩率，對的提升葉輪有正極的意義。

3.利用袋式除塵處理器，粉層排放口濃硫酸濃度超過一個國家法律規定的規則，大中國大地可以改善了實操者的勞功工作環境。

4.運用高耐磨硅橡膠履帶，解決了對產品工件的對撞及擠壓傷情況，較低了儀器的嘈音。

1. The machine adopts the cantilever centrifugal peen-forming device, with long service life and simple structure.

2. The BE separator has the good separation results and higher productivity, which has positive effec to the blade.

3. The bag filter, dust emission concentrations below the standards prescribed by the state, have greatly improved operator working environment.

4. The wear-resisting rubber crawler, less on the collision and damage, reduce the noise of the machines.

◆可用于位置 Applicable scope

      壓鑄件、高精度鑄件、高精度鍛件等的清除垃圾、光飾。出掉熱補救件、鑄件、鍛件的接觸面氧化物皮。扭簧的突破。擰緊件噴砂除銹和前補救。

1、符合芬蘭90年間末的拋丸清理機實施國內化研制。

2、通過直聯全力拋丸器，引入工作效率好，拋丸量大。

3、風選提取器、丸砂提取率不低于99%。

4、彈丸覆蓋率平均，無拋丸方位。

5、耐磨橡膠件安全使用生存期長，修改很快。

6、設備低嗓聲正常運行。

7、機械適用繼機械（或PLC）把控好，把控好柜、聲光電報警信號儀器，PC分為三菱數控系統茶葉高端品牌，最主要原電子元件分為PLC中外合資茶葉高端品牌工作簡便、耐用。

Die casting, precision casting, precision forging of cleaning, light ornaments. Remove heat-treated pieces, castings, forgings surface oxide skin. The  strengthening of the spring. Fasteners derusting and former processing.

1. Reference to Germany at the end of the ninety’s shot used the machine manufacturing.

2. The efficient direct coupling strength is shot, transfer the high efficiency, is shot amount is large.

3. Efficient wind separator, pill isolating rate of more than 99% of sand.

4. Projectile enclothe even, without peen-forming blind angle.

5. Wear parts of long service life, change quickly.

6. Low noise operation.

7. Electrical use relay (or PLC) control, control cabinets, sound and light alarm device, PC using mitsubishi brand,mainly by Siemens brand original device operation is simple, reliable joint venture.

◆主要是技術性基本參數 Main technical parameters